BEAMTECH 9005 H11 LED Headlight Bulbs Combo 100W 8000lms 6500K Conversion Light

Description

CSP 9005 H11 LED HEADLIGHT BULBS CONVERSION KIT
Replace High Beam,Low Beam/Fog  Light
50w/set,8000lm/set,Csp led chips
Description:
--CSP LED headlights: Imported CSP chips,high optical  density & low heat resistance,enhance light efficiency up to 95%. brilliant pure  white lighting.Without ballast.
--Fan-less design: Advanced heat conduction system+unique grooved heat sink fins  keep the light bulb in appropriate working temperature,No noise caused by fan.
--Error_free,Zrro warm-up: Work with most vehicle's computer system without  error.light uo your road instantly without warming up.
--Rain-Resistant: Better works on rainy days and even in the harsh conditions.
Features:
Available Single Beam Bulb size:  9005; H11 (Replace high beam;low beam/fog light)
Power: 50W/set(25W/bulb)
LED Quantity: 6Pcs / 12Pcs CSP LED Chips (each bulb)
Luminous Flux: approx.8000lm/set(4000lm/bulb)
Operating Voltage: DC 9-32V (fit 12V/24V vehicle)
Color Temperature: Cool White 6000K
Material: Aviation 6063 Aluminum Profile
Operating Temperature: -40-80 Degree Celsius
Waterproof rate: IP65 Water and Dust Seal
Beam Angle: 360 Degree
Life time: Above 50,000 hours
Warranty:3 Years
Package includes:
2Pcs 9005 +2Pcs H11 CSP LED Headlight Bulbs
English User Manual
Notice  1:
(1)These led headlight bulbs kit only replace  Factory Halogen bulbs, they will NOT replace Factory HID bulbs.
(2)
9005/HB3 led bulbs also can replace Fog Light 9145 9140 H10,but  before replacing,will need to do a little modification on the retainer  holder of led bulbs,then can twist to lock the bulb into place.
Notice 2:
All led bulbs have heat sink, please make  sure there is  enough space behind the headlight housing (about 45mm) for  the heat  sink of led headlight.
Q1. Will these led bulbs fit for my car?
The "Compatibility" table on Ebay may not be 100% accurate or up to  date.
If you don't know the part number of your existing bulb,Please follow  below steps to match correct led bulbs before purchase to avoid mistake.
(1)Go to "sylvania-automotive" website, find the part number of stock  bulb on your vehilcle.
(2)Take a look in your vehicle handbook or Take out your existing bulb from your vehilcle,verify the part number  of the bulb,match the part number on our listing.
(3)Please contact us via eBay message to tell us your vehilcle  information(Make,Model and Year),then we will help match right bulb.
Q2:How to install these led bulbs?
A:
Should be installed vertical, and the diodes are at 9 and 3 o'clock  position.
(about 9007/H4/H13 hi-lo beam led bulbs,the high beam is at the  bottom,the low beam is at the top)
(1) For some vehicle,such as Mazda, BMW, Dodge etc, will need extra  retainer ring/holder to install the H7 led bulbs on headlight housing.
(2) Each car's headlamp reflector is different ,so for some  vehicle,9004/9007/H4/H13 led bulbs will need adjust the angle to get the  good pattern. first let the headlight shines toward the wall,remove the  screws from the bracket and install the led bulbs into the headlight  housing and turn the bulb slowly to find the best pattern,then twist  back the screws of LED bulb's bracket to fix.Sometimes after finding the  best angle,maybe you will need to drill a new hole manually to fix.
Q3:After installing, why neither side led bulbs turn on or lighting up?  or both sides led bulbs are flickering ? or have error code on car  computer?
A: (1)First,unlike halogen bulbs, LED are polarity sensitive.Different car  manufactures have different polarity setup,if led bullbs don't turn on or  lighting up, Pls check for a polarity mismatch,disconnect the bulb and flip the  socket in order to reverse the polarity to install.
(2)Second,the vehicle's computer system is sensitive to the led headlight  bulb (
voltage problem
,the power of the led headlight bulb is lower than the halogen  ones). Therefore,it may be occur compatible problem after replacing the  led headlight on some vehicle,e.g. Audi, Mercedes, Ford, Volkswagen,  Volvo, Jeep Dodge and Ram etc, then will need to add resistor/decoders  to solve these compatible problems.
Link of resistor/decoders:
https://www.ebay.com/itm/183295265060
P
ayment
(1)We accept only
Paypal
for both domestic and international.
(2)Please don't bid if you don't intend to buy. If buyer want to delay  the payment because of financial problem, please contact me by the ebay  message within 3 days.
(3)Notice:buyers are responsible for all additional customs fee,  brokerage fee,duties,and taxes for importation into your country.
Shipping
(1)We will ship  your order via USPS from California within 24 hours after receiving your  verified payment.
(2)Please double check shipping address and other details.
We  will ship to the shown address on your PAYPAL Payment notice,Please  confirm your shipping address in the PayPal Account.
Shipping Method
Shipping  Destination
Shipping Time
USPS
USA
3-6 working days
USPS
CANADA
5-10 working days
Return
(1)
All return requests  must be submitted through your eBay account.You have to obtain a RMA  (ReturnMerchandise Authorization) number from us, and have the RMA number  written on the return package. (2)Buyers pay for return shipping fee. (3)Items  to be returned must be in resalable condition.
Customer Service
(1)If you have any question,please send us
eBay messages
,our  customer service will make best effort to help you with the issues.
(2)Our office hours are MONDAY - FRIDAY,all eBay messages take us around  24 hours to respond.
(3)Negative feedback will not help resolve any problems you have, please  send us eBay messages before leaving negative feedback, our customer  service will make best effort to help you with the issues.
V16  CREE Series
S1 CSP
Series
S2 COB
Series
RS mini Series