LCI-90R Line Control Instrument 25 (Measurement Technology NW) 6110 01 494 0225

Description

LCI-90R Line Control Instrument (NEW) (Measurement Technology NW)
NSN:
6110 01 494 0225
Location: E4
The UL and CE approved LCI-90R is designed to directly interface with either a LCI-100 or LCI-90 local unit. Up to 32 remote LCI-90R displays can be linked together with a single local unit to form a shipwide winch monitoring network.
Tension, payout, and line speed are displayed on a bright 320x240 electroluminescent display for unmatched readability in all light conditions. Serial networking capability (via the local unit) allows the operator to configure parameter position, scale, and unitson all remote LCI-90R displays in the network.
As with our full-featured LCI-100 and LCI-90 instruments, these displays flush panel mounted (standard application), or bracket mounted when ordered with an optional watertight stainless steel rear enclosure.
General Specifications
Instrument Specifications
Power
16 W @ 85-250 VAC (LCI-100)
3.8 Amp @ 18-36 VDC (LCI-90)
Other input voltages available
Analog Input
4 or 6 channels
Enclosure Size
H 5.7" x W 7.6" x D 5.0" (LCI-90)
H 8.0" x W 10.0" x D 5.5" (LCI-100)
Count Input
Quadrature encoder, 5, 12-24 VDC
Inductive proximity, Half Effect
10 kHz Bandwidth
Operating Temperature
-40°C to 75°C standard
Digitial I/O
4 or 8 Channels
Opto modules
DC output and dry contact
Environmental
Sealed, Waterproof front panel
Serial Communications
RS-485 (Optional), isolated, 2 wire
RS-232 (Optional), 1 channel, non-isolated
320 x 240 El (electroluminescent
Five Brightness Levels and a Full 360 degree Viewing Range
Fully Sealed Stainless Steel Front Panel with Available Watertight Rear Enclosure
Remotely Monitor Line Spead, Payout, and Tension
Serial Interface with Local LCI-100 or LCI-90 unit(s)
Up to 32 LCI-90  Remotes
Displays Can be Linked to a Single LCI-100 or LCI-90 Local Unit
UL and CE Rated, RoHS Exempt